Commissioning
System Manual
66
Notice
From a physical address a ABB-Welcome IP participant generates itself an own
IP address (IPv4) in the IP address range 10.x.x.x / 255.x.x.x
A physical address is specific in a ABB-Welcome IP system and must not be
assigned twice within a device category.
For example:
■
An outdoor station and an IP actuator can have the same physical address.
■
Two outdoor stations can not have the same physical address.
The "Smart Access Point" always has the IPv4 address 10.0.0.1 and
communicates with it with the ABB-Welcome IP participants.
In parallel the "Smart Access Point" can have an additional IP address.
■
Case 1: The "Smart Access Point" receives an IP address assigned from a
local DHCP server/router.
■
Case 2: The "Smart Access Point" receives a static IP address that is
manually assigned.
Physical addresses of the IP cameras
For IP cameras the following addresses are assigned in the functional network:
■
10.0.3.1 … 10.0.3.254
In this address range also other devices, such as a computer, can use the 10-type addresses
without coming into conflict with the ABB-Welcome IP address range.
Notice
Commercially available IP cameras with the profile "ONVIF Profile S" and the
video coding format "H.264" can be integrated in the ABB-Welcome IP system.
To Next Page
Loading...
