Case studies
System Manual
155
1
2
3
Fig. 140: Physical addressing: One-family house with one panel
The counting sequence of the physical addresses can be freely selected. However, it should be
noted that no physical address can be assigned twice to a device type. This would cause
conflict.
Physical Address Settings
Building No. Floor No. Units No. Device ID Mode
1 001 ― ― 01 ―
2 001 01 01 01 Master
3 ― ― ― ―
One-family house
/ Terraced house
Table 8: Physical addressing: One-family house with one panel
To Next Page
Loading...
