Case studies
System Manual
186
The counting sequence of the physical addresses can be freely selected. However, it should be
noted that no physical address can be assigned twice to a device type. This would cause
conflict.
Physical Address Settings
Building No. Floor No. Units No. Device ID
Mode /
Device type
1 001 ― ― 01
Outdoor station /
―
2 001 ― ― 01
― / Building IP
actuator
3 ― ― ― ―
Multi-unit house /
commercial / ―
4 001 02 01 01 Master / ―
5 001 03 03 01 Master / ―
6 001 02 02 01 Master / ―
7 001 03 04 01 Master / ―
8 ― ― ― 01 Gate station / ―
9 002 ― ― 01
Outdoor station /
―
10 002 ― ― 01
― / Building IP
actuator
11 002 02 01 01 Master / ―
12 002 03 03 01 Master / ―
13 002 02 02 01 Master / ―
14 002 03 04 01 Master / ―
Table 13:Physical addressing: Perimeter
To Next Page
