Commissioning
System Manual
75
Concierge call
If a Guard unit is used in the system, the call to the "Guard unit" can be enabled in the outdoor
stations.
■
This function can only be used by the outdoor station and the gate station of a building. This
function cannot be used by additional outdoor stations that are assigned to a unit as private
outdoor station.
■
If this function is enabled, each incoming call from this outdoor station will be transferred to
the "Guard unit".
For enabling, perform the following points:
■
Start the operation of the outdoor station as normal, see chapter 6.2.4 “Outdoor station with
display“ on page 70.
– Then perform the following steps:
Fig. 51: Outdoor station with display: Setting the concierge call
1. Open the "Settings" / "System settings" function.
To Next Page
Loading...
