Abbott Prodigy 3855 - Technical Support; Appendix A: Product Specifications; Patient Programmer Specifications

Table 8. Troubleshoong during postoperave programming
Problem Possible Cause Possible Soluon
Frequency is improperly set. Adjust sengs to a
comfortable level, avoiding
abrupt changes.
Acve electrodes are not posioned
over the correct target.
Set amplitude to zero and
program dierent
electrodes.
Paent has inadvertently changed the
programming.
Reprogram the system;
review operaon and usage
with the paent.
Painful Smulaon
Paent feels a burning sensaon. Lead is fractured or current is leaking. X‑ray the enre system for
lead fracture, breaks, or
sharp angles.
Paent has inadvertently changed the
programming.
Reprogram the system;
review operaon and usage
with the paent.
Excessive scarring or broc build-up is
present around the electrodes.
Order a new X‑ray and
compare it with the original.
Technical Support
For technical quesons and support for your product, use the following informaon:
▪ +1 855 478 5833
(toll-free within North America)
▪
▪ +1 651 756 5833▪
For addional assistance, call your local Abbo Medical representave.
Appendix A: Product Specicaons
NOTE: Not all models are available in all countries. Contact your local representave for more informaon.
Paent Programmer Specicaons
The
Prodigy
™ paent programmer (Model 3855 or 3856) has the following physical specicaons.
Table 9. Paent programmer specicaons
MRI status MR Unsafe
Height 6.8 cm (2.7 in.)
Length 10.77 cm (4.2 in.)
Thickness (T) 2.6 cm (1.0 in.)
Weight 128 g (4.6 oz)
Expected service life 5 years
Storage temperature -10
°C–55°C (14°F–131°F)
Storage humidity 10
%–90% (noncondensing)
Storage pressure 70–150 kPa (10.2–21.8 psi)
Operang temperature 10
°C–40°C (50°F–104°F)
37