Real Time Triplex Stand Alone DVR
37
CHAP 3. SETUP MENU
2.4 Date/ Time Setup
Everybody agrees that surveillance digital video recorders must indicate the exact date and time
information in which an event took place in order to be used as evidence. Therefore, configuring the
DVR to correct time and date is very important.
.
1) Live ON/OFF
2) PB ON/OFF
- When turned ON, it enables Display of camera names.
- When turned OFF, it disables Display of camera names.
3) Type YY/MM/DD, DD/MM/YY, MM/DD/YY
4) Date 2005/09/24
5) Time 19:44:00
- When the pointer is located next to Date or Time,
1. Press ENTER button
2. Set Date or Time
- Select it by pressing Up/Down button
- Move to the next by pressing Left/Right button
3. When you finish setting Date/ Time, press MENU button and then press Up/Down button to
move to other sub menu.
To return to main menu, press MENU button.
To Next Page
Loading...
General