Real Time Triplex Stand Alone DVR
47
CHAP 3. SETUP MENU
4.3 Event Action
To select notice method in order to make users get more attention when event recording occurs.
1) Alarm Out ON/OFF
You can set to enable (ON) or disable (OFF) the outbound signal from the DVR.
2) Sensor ON/OFF
When DVR detects signals from external sensors, DVR will beep or OSD to get your attention.
- BEEP + OSD : Beeps and shows “A” letter together. DVR records channels which are activated by sensor.
- OSD : On-Screen-Display only. DVR records channels which are activated by sensor.
- OFF : Disables to activate the alarm action
* 4 CH model records all 4 channels, when any one or more sensors are activated with BEEP+OSD or OSD
option. But 8/16 CH models record each channel activated by sensor.
3) Video Loss BEEP+OSD/ OSD/ OFF
If video signal from the cameras does not reach the DVR, a beep will sound to get your attention.
- BEEP+OSD : Beeps and shows “L” letter together. No recording.
- OSD : On-Screen-Display only. No recording.
- OFF : Disables to activate the alarm action
4) Motion BEEP+OSD/ OSD/ OFF
When DVR detects motion on certain part of the screen, DVR will beep or OSD to get your attention.
- BEEP + OSD : Beeps and shows “M” letter together. DVR records channels which are activated by motion.
- OSD : On-Screen-Display only. DVR records channels which are activated by motion.
- OFF : Disables to activate the alarm action
* 4 CH model records all 4 channels, when any one or more video motion are activated with BEEP+OSD or
OSD option. But 8/16 CH models record each channel activated by video motion.
• To return to main menu, press MENU button
To Next Page
Loading...
General