Real Time Triplex Stand Alone DVR
38
CHAP 3. SETUP MENU
2.5 Beep & PTZ Setup
This menu enables recording beep and external Pan/ Tilt & Zoom/ Focus cameras setup to
communicate with.
1) PAN/ TILT Pelco-D / Pelco-P / LG / Hitron / Dongyang
Select a desired protocol which is used for communication between the external Pan/ Tilt camera
and the DVR set.
2) Rec Beep ON/OFF
To enable recording beep when pressing REC button to start and release the function.
3) HDD Fail ON/OFF
To enable to beep when the DVR detects a bad sector of HDD in recording mode or playback mode.
It skips the bad sector that detected and records videos or plays recorded videos in the next sector
of HDD automatically.
HDD is logically divided to a large amount of sectors. It may have some bad sectors out of a large
amount of it. When this function is on, you are recommended to exchange with new one in order to
preventing from any potential problems caused by the HDD with bad sectors.
• To return to main menu, press MENU button.
Compatible Pan/ Tilt camera list
- Pelco-D, Pelco-P, LG, Hitron, Dongyang protocol.
Note
Note
To Next Page
Loading...
General