Real Time Triplex Stand Alone DVR
56
4. Pan/ Tilt/ Zoom/Focus Camera Control
Controlling an external Pan/ Tilt/ Zoom/Focus camera
CHAP 4. DISPLAY MODE
1. First press P/ T button in the remote controller.
2. Select your desired channel by pressing P/T button repeatedly.
3. Control the camera with the direction buttons (Up/ Down/ Right/ Left).
4. To release this function, press P/T button repeatedly until “P/T” disappears on the screen.
4.1 Pan/ Tilt Function
1) 16 channel display mode
2) One channel Mode
Indicates Pan/Tilt function.
1. First select your desired channel installed Pan/Tilt camera by pressing channel selection button.
2. And then you will see a full-size screen.
3. Press P/T button in the remote controller.
4. Control the camera with the direction buttons (Up/ Down/ Right/ Left).
5. To release this function, press P/T button again in the remote controller.
To Next Page
Loading...
General