Real Time Triplex Stand Alone DVR
57
2) One channel Mode
1. First select your desired channel installed Zoom/Focus camera by pressing channel selection button.
2. And then you will see a the full-size screen.
3. Press Z/F button in the remote controller.
4. Control the camera with the direction buttons (Up/ Down/ Right/ Left).
5. To release this function, press Z/F button again in the remote controller.
1. First press Z/ F button in the remote controller.
2. Select your desired channel by pressing Z/F button repeatedly.
3. Control the camera with the direction buttons (Up/ Down/ Right/ Left).
4. To release this function, press Z/F button repeatedly until “Z/F” disappears on the screen.
4.2 Zoom/ Focus Function
1) 16 channel display mode
Indicates Zoom Focus function.
CHAP 4. DISPLAY MODE
To Next Page
Loading...