36 Configuring the Wallbox eM4Single
Proceed as follows to connect the ABL Configuration App to a Wallbox eM4Single:
1 Open the ABL Configuration App on your mobile device.
2 After displaying the home screen, a screen on ABL’s Terms
and Conditions and Privacy Policy will appear.
J Tap Accept and continue to start the configuration.
NOTE
Accepting the Terms and Conditions and Privacy Policy
When opening the ABL Configuration App for the first time, after reinstalling the app or when ABL makes changes to the stored
documents, you must agree to the ABL Terms and Conditions and Privacy Policy on this screen.
x You will not be able to use the ABL Configuration App without actively consenting to these.
x If required, you can access, save and print the Terms and Conditions and Privacy Policy in text form (PDF) via the respective
links.
NOTE
Selecting the user language
You can switch the user language of the app between DE, EN, FR, IT and NL at the top left of the screen for confirming the Terms
and Conditions and Privacy Policy.
x For the following presentation and description of the working steps, the user language is set to EN.
3 After accepting the T&Cs, you must grant the app various
permissions to access functions on your mobile device.
x Devices in local network: Grant this permission to be
able to establish a wireless connection between your
mobile device and the wallbox.
x Camera: Grant this permission to scan the barcode on the
rating plate of the wallbox housing with the camera.
x Location: Grant this permission to find and connect to
WLAN networks in your area.
J Finally, tap Continue.
NOTE
Location sharing on Apple devices
On iOS 13 / iPadOS 13 and later versions, data for wireless communication can only be accessed if you allow the ABL Configu-
ration App to use Location Services on the mobile device. This is a technical policy from Apple, but the location data will not be
used by ABL in the app or shared with third parties.
To Next Page
Loading...
Need help?
General
