124
Please accept the settings you have made by clicking on "Save".
Linkage method
Set here which action is to take place in the event of an event.
Normal linkage
Send e-mail: You will receive an e-mail as notification, activate the checkbox for this.
Notify monitoring centre:The ABUS CMS software can be informed when an event is
triggered. This can be followed, for example, by an image pop-
up.
Upload to FTP/Memory Card/NAS: Check this box to upload frames to an FTP server, SD card or
connected NAS drive when an event occurs.
Trigger alarm output
When an event is triggered, existing alarm outputs on the camera can be activated. The behaviour of the
alarm output can be set under "Events / Alarm output".
Trigger recording
Activate to record to SD card when alarm input is triggered.
Accept the settings you have made by clicking on "Save".
To Next Page
Loading...
