130
8.7 Storage
8.7.1 Recording Schedule
Here you can configure time- and event-controlled recordings to save them on the SD card.
Post-recording
Set the duration for recording the image data after an event here.
Overwrite
Set here whether the recordings should be overwritten automatically when the memory space is full.
Elapsed time: With this function it is possible to limit the storage time on the SD card.
Timetable
To store a schedule, click on "Activate schedule". Determine here on which days of the week and at which
times the alarm output should be active.
The period is selected by marking it with the left mouse button. By clicking on an already marked period, the
details can also be set by keyboard or deleted again.
To copy the time selection to other weekdays, move the mouse pointer behind the bar of the weekday already
set and use the "Copy to ..." function. function.
Please accept the settings you have made by clicking on "Save".
Under Recording type, select the recording mode for the desired period of time. You have the
Selection between full recording types:
Normal: Continuous recording
Motion: Motion Controlled Recording
Alarm: Alarm input (if present)
Bew. | Alarm: Motion triggered or alarm input triggered recording. Camera records either when motion is
detected or when the alarm input is triggered.
To Next Page
Loading...
Need help?
General
