MAX_Kurzanleitung_Brief_Overview_V1.03_de_en 58 / 105
18.5 Intended use
18.6 Service
Please read this manual carefully and follow the recommendations so that your mobile workstation operates
in a fault-free manner. Always keep the manual at hand near the mobile workstation. Should you have any
questions, simply contact our Technical Support at the following address. You can download the full manual
and other technical documents from our customer portal.
Hotline +49 7392 708-488
E-mail support.technik@acd-elektronik.de
Full manual https://www.acd-gruppe.de/login/
18.7 Exclusion from liability
The manufacturer is not able to monitor adherence to the manual or correct operation and use of the mobile
workstation. Therefore, we do not accept any responsibility or liability for losses, damage or costs resulting
from incorrect use or improper behaviour, or which is connected in any way to such incorrect use or improper
behaviour.
The manufacturer reserves the right to make changes to the product, technical data or assembly and
operating instructions without notice.
Tampering with the mobile workstation or use other than intended use cancel the warranty!
If problems occur, the manufacturer must be asked for their decision on whether to send in
the mobile workstation or to have it repaired on site.
18.8 Responsible manufacturer
ACD Elektronik GmbH
Engelberg 2
88480 Achstetten
Germany
Phone: +49 7392 708-0
Fax: +49 7392 708-490
Web: http:\\www.acd-gruppe.de
The following activities are intended and permitted:
Carrying and transporting equipment, accessories and small parts in interior environments
within the specified power range.
The following activities do not constitute intended use:
Use outdoors or on unsurfaced ground.
To Next Page
Loading...