MAX_Kurzanleitung_Brief_Overview_V1.03_de_en 76 / 105
27.1.1 MAX TK with battery change system
Change the MAX TK battery changing tray as described in former chapter.
Figure 22: MAX TK battery changing tray with unlocking bolt and battery connection cable
Please note that only this version may be used in a deep-freeze zone. Please do not leave the mobile
workstation in a deep-freeze zone with the same battery pack for longer than 8 hours, otherwise there is a
risk that the electrolyte in the battery will freeze.
The ambient temperature before charging should be at least 15 °C, otherwise the battery will not
be sufficiently charged within the specified charging time.
Before changing the battery tray, switch the MAX cart off and unplug the battery connection plug.
After changing the battery tray, ensure it is properly locked in place. If the battery tray is not
locked, it can cause damage, including making the cart topple over.
To Next Page
Loading...