MAX_Kurzanleitung_Brief_Overview_V1.03_de_en 87 / 105
27.5.6.4 Li-on battery
Maintenance of lithium-ion batteries
The lithium-ion battery is maintenance-free.
Warnings about handling batteries
27.5.6.5 24 V DC/DC converter (option)
The DC/DC converter converts the 12 V direct current into a 24 V direct current. The connector for this 24 V
DC output is located on the rear of the mobile workstation.
Figure 30: 24 V DC output
Working in the vicinity of batteries can be dangerous. Batteries can produce explosive gases.
Avoid smoking, sparks or naked flames in the vicinity of batteries.
Wear goggles and protective clothing. Do not touch your eyes while working with batteries. After
working with batteries, wash your hands thoroughly.
Take care when using metal objects in the vicinity of batteries. This can cause a short-circuit and
an explosion of the battery.
Remove personal items such as rings, bracelets, watches and necklaces when working on
batteries. In the event of a short-circuit, these can lead to serious injuries.
Please note that the ambient temperature during charging must be at least 15°C in order to
achieve a sufficient charge state within the specified charging time.
Ensure correct polarity! Observe the maximum load (see technical data).
To Next Page
Loading...