H7530/H7530D Condential 2-6
4. Remove the Top IR Cap (as yellow arrow
point).
5. Tear off the black tape (as blue arrow
point).
6. Tear off the black mylar (as green arrow
point).
Top IR Cap
7. Unplug 1 connector (as purple square)
to disassemble the FPC cable.
8. Unscrew 4 screws (as red circle) to
disassemble the Keypad Board
and Keypads.
FPC Cable
Keypas
Keypa Board
NOTE: Circuit boards > 10 cm² has been
highlighted with the yellow rectangle
as above image shows. Please
detach the Circuit boards and follow
local regulations for disposal.
To Next Page
Loading...
