Acer H7530D - EDID Key-In Procedures (VGA;HDMI)

H7530/H7530D
Condential
6-3
6-3 Setup Procedure (VGA IN)
1. Connect all ports
(1) Connect P1 of xture with COM Port of
PC/Laptop by RS232 Cable.
(2) Connect P4 of xture with VGA IN
Port of projector by VGA Cable.
(3) Plug Power Adapter to JP2 of xture.
(4) Plug Power Cord to projector.
Note: - You must conrm that the JP3 is closed in
all procedure.
6-4 EDID Key-In Procedure
(VGA)
1. Execute EDID Program
- Double click "EDID" to execute EDID
program.
2. Process
(1) Select the COM Port which you are
using.
(2) Click "Model".
(1)
(2)
JP3
P4
RS232 Cable
Adapter
JP2
P1
VGA Cable
VGA IN Port
Power Port