H7530/H7530D
Condential
3-6
3-3 Beep Sound
No Scenario Beep sound denition
1 Power on (as soon as power button pressed) So(0.3s)
2 Power on (lamp lighting failed)
2 x {So(0.1s) – Off(0.1s)} per lighting failure
12s interval for each trial lighting. Max 4
times of trial
3
Power on (lens cap was not opened, for the
model with sliding lens cover only)
2 x {So(0.1s) – Off(0.1s)} periodically per 3
seconds, Totally 5 cycles. Turn off projector
after 5 cycles.
4
Close lens cap while projector is operating
(for the model with sliding lens cover only)
2 x {So(0.1s) – Off(0.1s)} periodically per 3
seconds, Totally 5 cycles. Turn off projector
after 5 cycles.
5 Power off (power button pressed twice) So(0.3s)
6 Fan lock So(0.1s) periodically per second
7 Overheat
2 x {So(0.1s) – Off(0.1s)} periodically per
second
8 Lamp error
3 x {So(0.1s) – Off(0.1s)} periodically per
second
9 Lamp Life reminding
3 x {Do(0.2s) – Off(0.8s) – So(0.2s)
– Off(0.8s)} with reminding message
10 Presentation Timer (time is up) 3 x {Do(0.1s) – Off(0.9s)} - So(0.5s)