ACT apricot - Page 246

SCREEN DRIVER
Table 1 - List of all the Apricot Escape Codes.
* - Not Sirius compatible
* 23 # Transmi t page. This code sends each character
on the screen to the MS-DOS input buffer
queue.
So after printing ESC #, the keyboard
buffer
will contain the entire contents of the
page.
24 $ Sends the character under the cursor into the
keyboard buffer.
* 25 % Transmits the line that the cursor is on into the
keyboard buffer.
* 26 & Prints the entire screen on a connected line
printer, after sending a Form Feed character.
* 27 Prints the line that the cursor is on on the line
printer - no Form Feed is sent first.
28 Set high intensity mode. All characters sent to
the VDU from now on will be displayed
brighter
than the others.
29 Cancel the high intensity mode, so all
characters
now sent to the VDU will appear at
equal brightness.
* 2A * Change to the second character font.
2B + Clear all the characters that are displayed on
the screen in High Intensity (see code 28).
* 2C Set the size of the video screen bounds.
Four
arguments are passed:
I-Top
line
2- Bottom line
3-Left column
4-Right column