EasyManua.ls Logo

ACT apricot - 128 Kbyteramexpansionboard; Modem; Options

ACT apricot
328 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPTIONS
An
alternative
version of
the
3.5
inch
floppy
disk
drive
can be
installed
within
the
System
Unit,
as a direct
replacement
for
the
floppy
disk
drives described above.
This
alternative provides
an
increase
in
the
size of
the
floppy disk
storage space available.
The
alternative
version
uses
80
track
double sided disks
(i.e.
160
tracks
per
disk)
and
also employs
the
same
format,
mode and
sector
size as detailed above. Each disk has
the
capacity
to
store 720 Kbytes of
formatted
data, producing a
corresponding increase
in
total
disk
capacity for a dual
MicroFloppy
disk
drive
system
to
1.44 Mbytes.
128KBYTE RAM EXPANSION BOARD
The
128 Kbyte RAM Expansion Board fits
into
the
expansion
slots
within
the
System
Unit.
Both expansion
slots can
accommodate
the
RAM board,
thus
providing
an
increase
in
the
size of
the
RAM
within
the
Apricot
to
either
384 Kbytes (one board),
or
512 Kbytes (two boards).
MODEM
The
Modem
option
is a
communications
facility to allow
an
Apricot
computer
to
transmit
and
receive
data
via
the
Public Switched
Telephone
Network
(PSTNj.
The
option
is
installed
within
the
Apricot
by
inserting
the
Modem
Board
into
one
of
the
expansion
slots
and
making
a
minor
modification
to
the
rear
panel
of
the
System
Unit
to
replace
the
expansion plate.
The
Modem
Board
consists
of a
modem
and
a
microprocessor
control
system.
The
modem
conforms
to
both
CCITT
V23
and
V21 standards
and
operates
in
anyone
of
the
following software selectable modes:
(a)
Full duplex 1200/75 bps.
(b)
Full duplex
300/300
bps.
(c)Half
duplex
1200/1200 bps.
The
microprocessor
control
system
acts as
the
interface
between
the
modem
and
the
system
processing
elements
on
the
System
Board,
and
also provides
the
Apricot
with
an

Table of Contents

Other manuals for ACT apricot