ACT apricot - Page 284

CONTROL DEVICE
COM = 8:
Set the number of STOP BITS PER CHARACTER to the
code in DAT (1 to3)
Value in DAT
1
2
3
COM = 9:
Desired Number of STOP BITS
ONE
ONE
AND A HALF
TWO
Set the PARITY TYPE to the code in DAT (0 to 2)
ValueinDAT
o
1
2
COM = 10:
Desired Parity Type
No Parity
Odd Parity
Even Parity
The current XON/XOFF TRANSMIT protocol is set
according to a code held in DAT.
COM = 11:
The current XON/XOFF RECEIVE protocol is set
according to a code held in DAT.
ValueinDAT
o
1
Desired Protocol Status
OFF
ON