ACT apricot - Page 288

CONTROL DEVICE
cOM=O
Return the Parallel status.
COM = 1
This option will return the amount of free bytes left in the
print buffer is returned in RET.
cOM=2
Set the FAULT line status:
DA T = 0 - Disable
DAT = 1- Enable
cOM=3
Set the SELECT line status detect:
DA T = 0 - Disable
DAT = I-Enable
cOM=4
Set the PAPER ERROR line status detect:
DA T = 0 - Disable
DAT = I-Enable
cOM=5
Set the Auto LF after CR enable:
DA T = 0 - Disable
DAT = 1- Enable