Packaging & Disposal
© 2018 ACTIA I+ME GmbH │ Ref. IR:14938 20 / 92
6.1.1 Unpacking and Disposing of the Packaging Material
1 Pull up the packaging cover
2 Pull out the external sealing flaps from the sides of the packaging board
3 Open the packaging lid entirely
4 Remove the enclosed “Getting started” document
The passwords, installation instructions and functionality descriptions are
listed in the “Getting started” document. Keep it safe!
5 Pull up the packaging protection above by the two notches
6 Carefully pull the BOP xD up to take it out
Protect the device from humidity, water, acid, solvents and dust.
Do not let the device fall.
To Next Page
Loading...
