Actia BOP xD - Language; Review Mode; Time Zone String; Vehicle Identification

Web Interface
© 2018 ACTIA I+ME GmbH │ Ref. IR:14938 51 / 92
NOTICE
The current time (atomic time) can be checked with the Phyiskalisch
Technische Bundesanstalt (Physical Technical Federal Institute) at
http://www.ptb.de/de/zeit/uhrzeit.html
All data is presented in Coordinated Universal Time (UTC)
The following is valid for Germany:
Winter time = UTC + 1 hour
Summer time = UTC + 2 hours
12.5.1.2 Language
The BOP interface language can be selected from the “Language” list. This setting is
enabled once the configuration is saved.
 Language (always EN) – 8 different languages
12.5.1.3 Review Mode
 Review Mode – The device can run as a Reviewer Station Value 0/1.
When set to value 0, the system does not run as a recorder but as a
network server for hard drive backup. The Video Data Converter with
a USB 3.0 port can also be used for hard drive backup. This requires
installing the necessary drivers.
12.5.1.4 Time Zone String
 Time Zone String – 3 pre-set time zones, see the enclosed datasheet
for additional time zones.
12.5.1.5 Vehicle Identification
The vehicle identification serves the purpose of video data allocation. The clear
unique designation of the vehicle where BOP is installed must be entered. The vehicle
identification is displayed when reading the data in BOP ReviewerSoftware.
 Vehicle identification - BOP serial number, bus licence plate number