Actia BOP xD - Network

Web Interface
© 2018 ACTIA I+ME GmbH │ Ref. IR:14938 70 / 92
12.5.6 Network
ATTENTION - Impaired communications warning
The settings in section >Network parameters< affect the
external communication with BOP. This could lead to a
e.g. a message not being sent in the event of an alarm or
to a lack of possibility for setup.
 Modify the settings only following the
network administrator’s instructions.
 NOTICE all modifications that have been
performed.
Figure 29) Network paramters
The communication parameters for the front and back Ethernet interface are set via
the network parameters.