Start-up
© 2018 ACTIA I+ME GmbH │ Ref. IR:14938 26 / 92
8 Start-up
ATTENTION - Material damage
If the BOP xD configuration is wrong, there is a risk that
the system will not function within the desired scope.
Start-up and system modification may only be performed
by respectively trained qualified personnel.
8.1 Start-up
The BOP xD does not require any special start-up measure - all relevant data has
already been preinstalled by the manufacturer.
8.2 Configuration
The configuration is done over a web interface. The connection is made over the
Ethernet interface and a web browser. The access to the configuration data is
secured by a password. You can find more information on configuration, see chapter
12 Web Interface.
The configuration of BOP xD must be checked during the initial startup of
the entire system. When completed, it is recommended to save the configu-
ration data to an extern storage device and to change the passwords.
To Next Page
Loading...
