Actia BOP xD - Sequencing Time; Switch-Off Delay

Web Interface
© 2018 ACTIA I+ME GmbH │ Ref. IR:14938 52 / 92
 Vehicle ID part - Vehicle ID prefix, customer defined
 Vehicle number range - vehicle number value range
12.5.1.6 Sequencing Time
The sequencing time is the time period during which the video data is being saved to
a file. After the time for saving a sequence file expires, a new file with the next
sequential number is created.
 Together with the video settings, sequencing time affects the size of
the video files.
Figure 16) Configuration Part 2
12.5.1.7 Switch-off Delay
The video surveillance system is not switched-off together with the ignition, but after
a predefined switch-off delay time. If the ignition is switched on again within this
period of time, BOP is not switched off and the switch-off delay is reset.