Actia BOP xD - Installation and Mounting; Place of Installation

Mounting and Installation
© 2018 ACTIA I+ME GmbH │ Ref. IR:14938 22 / 92
7.2 Installation and Mounting
7.2.1 Place of Installation
When choosing a place for the installation of BOP xD, take the following points into
account:
NOTICE
The BOP xD may not be subjected to direct weather effects.
 The mounting spot must be sufficiently ventilated to avoid condense
water and trapped heat.
 Access for connecting peripheral devices, maintenance and data
storage replacement must be provided.
 Unauthorised persons should have no direct access to the device.
The installation spot must be freely accessible at all times and it must not disturb the
driver’s work. The necessary power sources, IBIS data cables, video camera cables
and other required equipment must be available at the place of installation.
Good installation places are:
 The roof coving above the driver
 The roof coving above the front passenger seats