5-2 ADS TRITON+ Manual
z Install the Sensors in the Pipe This process primarily
includes assembling the ring (for standard installations) or
preparing the bands to which the sensors attach, mounting the
sensors to the ring or bands, securing the sensor cables to the
ring or bands, and installing the ring or bands in the pipe.
z Install the Long Range Depth Sensor in the Manhole
Structure This process involves installing the Mounting Bar
near the top of the manhole, attaching the Long Range Depth
Sensor to the Mounting Bar, and affixing the Submersion
Sensor to the manhole frame.
z Install the ParaDepth or ParaFlow Sensor in the
Manhole using the ADS Topside Retrieval System
This process involves installing a Mounting Bracket in the
manhole, installing the sensor on the Sensor Bracket, seating
the Sensor Bracket on the Mounting Bracket. Once installed,
the sensor can be retrieved topside using the Topside Retrieval
Tool that comes as part of the Topside Retrieval System.
z Secure and Connect the Cables This procedure involves
securing the sensor cables from the ring or band to the monitor
location in the manhole and connecting the sensors to the
TRITON+ monitor. It also includes general instructions for
connecting a third-party water quality sampler to the monitor.
To Next Page
Loading...
