ADS TRITON+ - Page 503

B-6 ADS TRITON+ Manual
8 FT (2.44m), SS
700
-100238-00
SPECIAL INSTALL RING MATERIAL, SS, 12 IN
(304mm) LONG
I40
-0009
FLANGE HANDLE (
for mounting monitor in manhole
) 2
IN (51
mm) WIDE X 18 IN (457mm) LONG X 0.25 IN
(6
mm) THICK
508058
BOLT, HEX, SS, M8 X 30MM
1
517
-8001254-00
WASHER, FLAT, SS
1
517
-8001274-00
WASHER, SPLIT LOCK, SS
1
8000
-0021
HOOK, SS, 2
-PIECE W/ HARDWARE (FOR
MOUNTING MONITOR ON MANHOLE RUNG)
I10
-0003
SPREADER MECHANISM FOR RING, COMPLETE, SS
I40
-0010
BRACKET, SURCHARGE, with ULTRASONIC SLIDE
(Note:
When ordering this bracket, you also must order
the
Sliding Adapter Bracket (8000-
0299) for receiving the
Ultrasonic Depth Sensor.)
I10
–0012
18
-IN (610-mm) CRANK HANDLE, SS
8000
-0489
TOOL, SPEED HANDLE, 18”, 13MM SOCKET
1
This item is part of the mounting hardware included with the monitor for the flange handle
(ADS p/n I40-0009).
Note: In all applications, only ADS IS-Certified Service
Technicians are authorized to perform TRITON+ board
and/or component-level.