ADS TRITON+ - Page 518

In-2 ADS TRITON+ Manual
upward ultrasonic depth
measurement, 2-17
AV|Gated
verifying the sensor position, 4-93
AV|Gated
install information, 5-21
AV|Gated
mounting across from crank, 5-21
AV|Gated
install information, 5-24
AV|Gated
mounting across from crank, 5-24
AV|Gated
mounting to the ring, 5-24
AV|Gated
install information, 5-24
AV|Gated
mounting across from crank, 5-24
AV|Gated
securing the cables, 5-27
AV|Gated
verifying the sensor position, 5-29
AV|Gated
installing the ring warning, 5-29
AV|Gated
installing in pipes with silt, 5-31
AV|Gated
physical offset, 5-35
AV|Gated
special installs, 5-38
AV|Gated
securing dryer tube to the monitor,
5-99
AV|Gated Sensor, 1-4
part number, A-6
specifications, A-6
AV|Max
general, 2-1
install information, 5-21, 5-24
mounting to the ring, 5-24
overview, 2-18
physical offset, 5-35
upward ultrasonic depth
measurement, 2-20
verifying the sensor position, 5-30
AV|Max Sensor, 1-4
part number, A-7
specifications, A-7
B
band
securing the sensor cables, 5-52
battery pack, 1-5, 2-11
replacement, 11-12
voltage
minimum, 11-9
Battery voltage
storage options, 4-18
board
voltage regulator, 2-12
C
cables
connecting the computer directly
to the monitor, 3-22
connecting the computer to the
monitor through the ExPAC, 3-
23
direct connect, 3-22
indirect connection, 3-23
sensor
extension, 5-42, 5-63
securing in the pipe/manhole, 5-
95
securing to the band, 5-52
securing to the ring, 5-27
standard A-to-B USB cable, 3-23
USB serial interface, 3-22
driver installation, 3-23
specifications, A-20
CDMA/EV-DO communication, 3-3
modem
information, 1-13
cellular network, 2-5
certifications, 1-10
ATEX, 1-13
CSA, 1-20