3-4 ADS TRITON+ Manual
functionality. Remote communication with a TRITON+ requires
entering the IP address for the location into the Qstart
XML
software.
When using a static IP with a public IP address, the PC must have
internet connectivity. When using a static IP with a private IP
address, the PC first must establish a VPN connection with the
provider. (Please consult ADS Client Services for more
information on using private addresses.) Then, the user can
connect to a monitor through Qstart
XML
, provided the location has
been properly configured. Consult the Qstart
XML
online help for
further information on wireless setup and use.
Currently, dynamic IPs may be used only for uploading data
wirelessly from the monitor to an FTP site or an ADS Web-based
software database. Communicating directly through ADS software
to set up and activate monitors equipped with dynamic IPs must
occur over a direct connection using the ADS USB Serial Interface
cable (ADS p/n 8000-0337).
To Next Page
Loading...
