3-8 ADS TRITON+ Manual
an L-bracket can be installed, Obtain the following items for an in-
manhole antenna installation:
z ADS wireless antenna (p/n 9000-0094 or 0096)
z Cable ties to secure the antenna
z Lag bolt, L-bracket and masonry drill bits for drilling through
manhole wall, corbel, and other materials when there is no
rung or mounting bracket from which to hang the antenna
Tools and Equipment for Outside-of-the-
Manhole Antenna Installation
Obtain the following items for an outside-of-the-manhole antenna
installation:
z ADS wireless antenna (p/n 9000-0094 or 0096) or a customer-
supplied antenna verified by ADS for successful monitor
communications
z Extension cables (16-foot (4.9-m): ADS p/n 509154; 49-foot
(14.9-m): ADS p/n 509155) for antenna, as needed
z 8-mm anchor bolts with washers and nuts
z Medium-sized non-rotating demolition hammer with a 0.5-inch
(13-mm), 0.75-inch (19-mm), or 1-inch (25-mm) masonry
chisel (sharpen the chisel before use) and bushing tool, or an
abrasive saw or grinder
z Masonry drill bits for drilling through manhole wall, corbel,
and other materials. Include the following:
0.5-inch (13-mm) diameter (minimum) x 12-inch (305-
mm) long (minimum) bit
0.5-inch (13-mm) diameter x 36-inch (914-mm) long
(minimum) bit
1.25-inch (32-mm) diameter x 12-inch (305-mm) bit
z Standard drill bits and masonry bits up to 0.6 inches (15 mm)
in diameter
z Medium- to heavy-duty hammer drill (if no hammer/drill mode
is available on the demolition hammer)
To Next Page
Loading...
