4-Channel Digital Video Recorder
17
Storage
Highlight Storage in the System menu and press the button. The Storage setup screen appears
and displays information about the DVR’s storage devices.
NOTE: The DVR does NOT support USB hard disk drives with a version lower than 2.0.
The Information column displays whether the device is being used or not. Other indicates the
device has been used for another DVR.
Highlighting Clear and pressing the button will clear all video data. You will be asked to verify
that you wish to clear all data before the DVR erases the video data.
Figure 11 Holiday setup screen.
You can set up holidays by highlighting
+
and
pressing the
button. The current date
appears.
Highlight the month and day and change them
by using the Up and Down arrow buttons. Press
the
button to add the date. Dates can be
deleted by highlighting the
beside the date
and pressing the
button.
NOTE: Holidays that do not fall on the same
date each year should be updated once the
current year’s holiday has passed.
Figure 12 Storage Information setup screen.
The information in the Type column describes
the storage device.
The capacity of the storage device is displayed
in the Capacity column.
The Format column displays whether the device
is used for recording (Record) or not (Not
Using). Not formatted indicates the device is
not formatted.
Highlight the box in the Format column for the desired storage device
and press the
button. You will be able to format the device for
recording. When selecting Not Using from Use As and highlighting
the Format button, the device will not be used for recording.
Highlight the box in the Information column for the desired
storage device and press the
button. The box beside
Recorded Data – From / To displays the time information
of recorded data.
To Next Page
Loading...
Need help?
General
