User’s Manual
52
NOTE: When the DVR is not in the Recycle mode and all available storage space has been
used, panic recording will not operate.
Although you will be able to record without changing the unit from its original factory settings,
you will want to take advantages of the DVR’s many tools. See Chapter 3 Configuration for
detailed descriptions of the recording mode options.
Recording Audio
If the DVR was set up to record audio, it will record audio from the input when video is recording.
The DVR will not record audio when the recording speed is set to less than 1 ips.
NOTE: Make certain you comply with all local and federal laws and regulations when
recording audio.
Playing Recorded Video
If a user who has Search authority logs into the system, the user can view recorded image. Once
video has been recorded, you can view it by pressing the
SEARCH button. When playing video
for the first time, the DVR will display the most recent image. When playing video subsequent
times, the DVR will start playing video from the last recalled image. Recorded audio will be played
when the DVR displays a camera with recorded audio in full screen mode.
Camera Buttons: Pressing the individual camera buttons will cause the selected camera to display
full screen, and pressing the button again changes the display format to the quad (2x2) mode.
Arrow Buttons: Pressing the button plays video backward at high speed. Pressing the button
again toggles the playback speed from , and . Pressing the button plays video
forward at high speed. Pressing the button again toggles the playback speed from , and
. When in the pause mode, pressing the button moves to the next image and pressing the
button moves to the previous image.
Pause Button: Pressing the button pauses playing video.
Search Button: Pressing the SEARCH button enters the search mode, and pressing the button
again exits the search mode. When entering the search mode, video is paused. Pressing the
button plays back video at regular speed. The screen displays
when the DVR is in the Pause
mode and the screen displays
when the DVR is playing back video.
Zoom Button: Pressing the ZOOM button zooms in the current image on the screen. It is the
same as selecting Zoom from the Camera Menu in the Search menu.
You can use a mouse for convenient playback control. Position the mouse pointer on the playback
screen, and the following playback toolbar will display.
To Next Page
Loading...
Need help?
General
