User’s Manual
62
12. Right click the newly created hard disk drive icon and select “Format”.
13. In the Format Screen, select “Full” as the “Format type” and click “Start”.
14. After formatting is complete, connect the USB hard disk drive to the DVR.
Time Overlap
If the DVR’s time and date have been reset to a time that is earlier than the existing recorded video,
it is possible for the DVR to have more than one video stream in the same time range. In this case,
you can search overlapping video streams individually by selecting a specific segment. For example,
when the DVR has recorded video from one to five o’clock and the user changes the time backward
from five to three o’clock and then continues recording until six o’clock, there will be two video
streams and segments from three to five o’clock.
You can search overlapping video streams by selecting a specific time or time range. If you want
to search recorded video at four o’clock during the overlapping time range using a search menu
such as Go to the Date/Time, select the segment you want to search.
If you want to search recorded video from four to five o’clock during the overlapping time range
using a search menu such as Event Log Search or Calendar Search, it is possible for the DVR
to have two overlapping start and stop times. You will be asked to select one of the overlapping
start and stop times from the search time ranges as follows:
y From four o’clock of the first segment to five o’clock of the first segment
y From four o’clock of the first segment to five o’clock of the second segment
y From four o’clock of the second segment to five o’clock of the second segment
WebGuard
WebGuard allows you to access a remote DVR, monitor live video images and search recorded
video using Internet Explorer web browser anytime from virtually anywhere.
To Next Page
Loading...
Need help?
General
