To Next Page

To Previous Page

4-Channel Digital Video Recorder

Computer system requirements for using the WebGuard program are:

y Operating System: Microsoft

Windows

XP x86 (32 Bit) (Service Pack 3), Microsoft

Windows

Vista x86 (32 Bit) (Service Pack 1) or Microsoft

Windows

7 x86 (32 Bit)

y CPU: Intel Pentium III (Celeron) 600MHz or faster

y RAM: 128MB or higher

y VGA: 8MB or higher (1024x768, 24bpp or higher)

y Internet Explorer: Version 6.0 or later

Start Internet Explorer on your local PC. You can run the WebGuard program by entering the

following information in the address field.

– “http://IP address:port number” (The DVR IP address and the WebGuard port number (default:

12088) set in the Network setup screen (WebGuard tab))

– Or, “http://DVRNS server address/DVR name” (The DVRNS server address and the DVR name

registered on the DVRNS server)

– Or, “http://www.dvronline.net” (Entering the DVR IP address or the DVR name will be required

when logging in)

NOTE: You will need to get the appropriate IP address for the DVR you want to connect to

and the WebGuard port number from your network administrator.

NOTE: WebGuard only works with Microsoft Internet Explorer and will NOT work with other

browsers.

Select between the WEBWATCH (Web monitoring) and

WEBSEARCH (Web search) modes. Entering ID and

PASSWORD and clicking the [LOGIN] button logs in using

the selected mode.

You will need to enter the DVR IP address in the DVR ADDRESS field when running the

WebGuard program by entering http://www.dvronline.net. Selecting the Use DVRNS option

allows you to enter the DVR name registered on the DVRNS server instead of the IP address.

You must enter the DVRNS server address and port number in the SETUP setting when selecting

the Use DVRNS option.

NOTE: Do NOT close the LOGIN window during the WebGuard operation, otherwise, it will

cause a script error when switching between Web monitoring and Web search modes and

running the WebGuard program again will be required.

NOTE: When running the updated WebGuard for the first time, Internet Explorer might

occasionally load the information of the previous version. In this case, delete the temporary

internet files by selecting Tools

Internet Options

General tab, and then run WebGuard

again.

NOTE: There might be a problem that the bottom of WebGuard page is cropped due to the

address or status bars in Microsoft Internet Explorer 7.0. In this situation, it is recommended

that websites open windows without address or status bars by changing the internet setting.

(Go to the Tools

Internet Options

Security tab

Click the Custom level… button

Select Enable for the Allow websites to open windows without address or status bars option)

Brand	ADT
Model	4-Channel
Category	DVR
Language	English

ADT 4-Channel User Manual

Table of Contents

Questions and Answers:

ADT 4-Channel Specifications

Related product manuals