4-Channel Digital Video Recorder
21
Figure 16 Quick Setup Wizard screen.
If you selected the Quick wizard, selecting the
Next button starts the Quick Setup Wizard.
Date/Time Setup
y Date: Set the system date and select the date
format.
y Time: Set the system time and select the time
format.
y Time Zone: Select your time zone. The Time
Zone can be selected on the map.
y Use Daylight Saving Time: Selecting the
box sets the system to use daylight saving time.
NOTE: The Date/Time will be set, and the
clock will start when you click the Next
button.
Record Method Setup
y Select the desired recording mode from:
– Motion Event Record (Recommended)
– Continuous & Motion Event Record
– Continuous Record
NOTE: You should understand each
recording mode before setting the DVR’s
recording method.
To Next Page
Loading...
Need help?
General
