4-Channel Digital Video Recorder
67
ཥ
Click the to save any video clip of recorded data as an executable file, or click the to save
the current image in a bitmap or JPEG file format.
ས Click the to print the current image on a printer connected to your computer.
ཧ Click the to reload the recording data.
ཨ The timetable displays recorded data of the selected camera by time (in hour segments).
ཀྵ Selecting a camera on the screen and clicking the right mouse button displays the text menu
screen.
y Change Camera Title: Changes the camera name.
y Enable Audio: Plays audio while playing back recorded video that has recorded
audio. (Single-Screen Layout Only)
y Aspect Ratio: Changes the image aspect ratio.
y Deinterlacing: Using a deinterlace filter for interlaced video enhances image
display quality by eliminating horizontal scan lines and noise in areas with motion.
y Anti-Aliasing Screen: Enhances image display quality by eliminating stair
stepping (aliasing) effects in the enlarged image.
NOTE: A camera name change in the Web Search mode does not affect the camera name
set up on the remote site. Leaving the Camera Title blank causes the camera name set up
on the remote site to display.
Troubleshooting
Problem Possible Solution
No Power
y Check power cord connections.
y Confirm that there is power at the outlet.
No Live Video
y Check camera video cable and connections.
y Check monitor video cable and connections.
y Confirm that the camera has power.
y Check camera lens settings.
Live Video Very Bright
If a cable is attached to the “Loop” connector, make certain it is
connected to a properly terminated device.
DVR has stopped
recording
If hard disk drive is full, you will either need to delete video or set
the DVR to the Overwrite Mode.
The icon displays,
however, the DVR is not
recording.
When the DVR is in the Pre-Event recording mode, the yellow
and
display when there is no event, and the DVR is not recording.
The red
and
display when any event occurs and the DVR starts
recording.
To Next Page
Loading...