4-Channel Digital Video Recorder
19
Highlighting a Group Name and pressing the button allows you to change the authority levels
assigned to the group.
CAUTION: Write down the new password and save it in a secure place. If the password
is forgotten, the unit must be reset using the Factory Reset Button and all data settings
will be lost.
Highlighting a User Name and pressing the button allows you to add or change the password
assigned to that user. You can also change the group to which the user is assigned.
The column can be used to delete a User Name or an entire Group. If the is grayed out, that
Group or User cannot be deleted. Highlight the
and press the button. You will be asked to
confirm that you want to delete the User or Group. To delete the User currently logged into the
DVR on a local system or a PC running RAS, log the user out of the system first and then delete
the user.
To add a Group, highlight the + Group… box and press the button. A virtual keyboard appears
allowing you to enter the Group name.
y Shutdown – The user can shut the system down on a local system.
y Upgrade – The user can upgrade the software on a local system or a PC running RAS.
y Color Control – The user can control brightness, contrast, hue and saturation for cameras on a local
system or a PC running RAS.
y System Check – The user can view the remote system status or check the remote system status as a
batch process on a PC running RAS.
y PTZ Control – The user can control the PTZ camera on a local system or a PC running RAS.
Figure 14 User setup screen.
The +/- column is used to collapse and expand
user groups. If there is a + or – in this column,
it indicates the item is a Group Name. If there
is a – in front of the Group Name, it indicates
that the group has been “expanded” and all of
the User Names within that group are displayed
below the Group Name. If there is a + in front
of the Group Name, it indicates that the group
has been “collapsed” and all of the User Names
within that group are hidden. To collapse or
expand a group, highlight the +/- column in front
of the desired group and press the
button.
You can use up to 15 characters including spaces in the group
name. Enter the name and assign authority levels to the group.
Highlighting the Authority box and pressing the
button will
toggle between all authority levels being turned On and Off.
Highlighting the individual authority level boxes and pressing the
button will toggle between that authority level being turned On
and Off. The authority levels that can be turned On and Off are:
To Next Page
Loading...
Need help?
General
