User’s Manual
58
Highlight the box beside Dest. and press the button. You can select the storage device on which
you would like to record the video clip.
CAUTION: The USB device for clip copy must be FAT 16 or FAT32 format.
The DVR automatically assigns a file name to the video clip. However, you can give the video
clip file a different name. Highlight the box beside File Name and press the
button. A virtual
keyboard appears. Enter a file name for the video you are backing up and select Close. The DVR
will automatically add the camera number (for example “01”) and “.exe” to the file name.
NOTE: When naming a file, you cannot use the following characters: \, /, :, *, ?, “, <, >, |.
Once you have given the video clip a file name, highlight the Start button and press the button.
The confirmation screen displaying data size will appear. When the storage device does not have
enough space, the DVR will ask if you want to copy as much of the video clip as possible in the
available space.
Highlight the Continue button and press the button to continue clip copy.
Once the clip copy starts, you can cancel it by selecting Cancel or hide the screen by selecting
Close. When selecting Close, Clip Copy continues and a confirmation screen will display when
complete.
NOTE: The file size for clip copy is limited to 30GB. When copying video clips larger than
2GB, the video clips will be save in units of 2GB. For example, 3 individual 2GB files will
be created when saving a 6GB video clip. However, the file size for the One-Touch Clip Copy
is limited to 2GB.
You can use other functions on the DVR while video is being backed up. To do this, highlight
the Close button and press the
button. You can return to the Clip-Copy screen at any time to
check the progress.
Figure 58 Clip-Copy screen.
Highlight the box beside From and press the (Play/
Pause) button to set a starting Date and Time.
Highlight the box beside To and press the button to
set an ending Date and Time.
Highlight the box beside Channels and press the
button. You can select the cameras that you would like
to include in your video clip.
Highlight the box beside Password and press the
button. A virtual keyboard appears allowing you to enter
the password for reviewing the video clips.
To Next Page
Loading...
Need help?
General
