Advanced Instruments OsmoTECH XT - Page 36

Chapter 3 Configuring settings
37
OsmoTECH XT Single-Sample Micro-Osmometer User Guide
– RANGE
Change the operating range corresponding to a
locked remote instrument as part of running a series
of tests.
– START
Start tests on a locked remote instrument using
sample IDs and ranges with continuous live
monitoring of test progress.
– ; (semicolon) delimited values
Send sample IDs (including custom IDs) to a locked
remote instrument as part of running a series of
tests.
You can send conventional Advanced Instruments sample
IDs or custom IDs.
The instrument prompts the local operator to
perform the tests.
Prepare the samples, press OK, and run the tests (see
Testing samples).