Advent Communications
209298 - DVE5000 Technical Operation Handbook - CL140042 Page 61 of 110
PRESS ESCAPE to return up a menu level.
7.2.7 RESET
By using the up / down arrow keys, highlight RESET and press ENTER key.
This screen will be displayed: -
- HPA Reset -
HPA A Fault Reset:
HPA B Fault Reset:
HPA A (B): Fault Reset: In the event of a fault in an HPA , ‘reset’ command may be sent to the
HPA to try and recover from the fault that has occurred for example, high reflected power.
PRESS ESCAPE to return up a menu level.
7.2.8 VERSIONS
By using the up / down arrow keys, highlight VERSIONS and press ENTER key.
This screen will be displayed showing the revision of various internal modules, which should be
quoted to customer support department on request to help diagnose any problem experienced:
-
- HPA Control Versions -
Module: xxxxxxxxx
Software Revision: xx.x
Unit Library: xx.xx
Menu Library: xx.xx
To Next Page
Loading...
Need help?
General