Advent DVE5000 SERIES - Preset Commands

Advent Communications
209298 - DVE5000 Technical Operation Handbook - CL140042 Page 96 of 110
8.6.4 Preset commands
The following commands are used to store and recall presets
Command WPSTSxxx
Response RPSTS
Query not available
Response not available
Store current settings
(saves the current
settings under the preset
number)
Parameters xxx = preset number
Command WPSTLxxx
Response RPSTL
Query not available
Response not available
Recall preset
Parameters xxx = preset number
Command WPSTDxxxyyy
Response RPSTDxxxyyy
Query RPSTDxxx
Store preset string
(saves the settings to
the preset number)
Response RPSTDxxxyyy
Not implemented