Advent DVE5000 SERIES - Remote Encoder Settings Commands

Advent Communications
209298 - DVE5000 Technical Operation Handbook - CL140042 Page 76 of 110
8.6.7 Remote Encoder settings
Command WEPROx
Response REPROx
Query REPRO
Response REPROx
Profile
Parameters x – profile (0=4:2:0, 1=4:2:2)
Command WEAUTx
Response REAUTx
Query REAUT
Response REAUTx
Auto video rate
Parameters x – auto video rate (0=OFF, 1=ON)
Command WEBITxx.xxxx
Response REBITxx.xxxx
Query REBIT
Response REBITxx.xxxx
Parameters xx.xxxx – video bitrate (no units)
Video Bitrate
Comments Cannot be set if auto video rate is ON
Command WEMODx
Response REMODx
Query REMOD
Response REMODx
Delay mode
Parameters x – delay mode (0=standard, 1=low delay)
Command WEHORx
Response REHORx
Query REHOR
Response REHORx
Horizontal resolution
Parameters x – horizontal resolution (0=720, 1=704)
Command WEASPx
Response REASPx
Query REASP
Response REASPx
Aspect ratio
Parameters x – aspect ratio (0=4:3, 1=16:9)
GOP length Command WEGOPxx