Advent Communications
209298 - DVE5000 Technical Operation Handbook - CL140042 Page 79 of 110
Parameters 0= test tone (disabled), 1 = Analogue, 2 = SDI Emb 1, 3
= AES-EBU
Command WABITx
Response RABITx
Query RABIT
Response RABITx
Audio A Bitrate
Parameters x – bitrate (0=128Kbs, 1=160Kbs, 2=192Kbs, 3=224Kbs,
4=256Kbs, 5=320Kbs, 6=384Kbs, 7=448Kbs (layer I))
Command WAMODx
Response RAMODx
Query RAMOD
Response RAMODx
Audio A mode
Parameters x – mode (0=stereo, 1=dual mono)
Command WALANx
Response RALANx
Query RALAN
Response RALANx
Audio A Language
Parameters x – language (0=Eng, 1=Spa, 2=Ger, 3=Fre)
Command WAPID
Response RAPIDxxxx
Query RAPID
Response RAPIDxxxx
Audio A PID
Parameters xxxx – audio A PID (in range 32-8190)
Command not available
Response not available
Query RALOC
Response RALOCx
Audio A AES/Emb
Lock
Parameters x – audio locked (0=NO, 1=YES)
Command WATONx
Response RATONx
Query RATON
Response RATONx
Audio A Test Tone
Parameters x – test tone (0=OFF, 1=800Hz)
Command WAAUTx
Response RAAUTx
Query RAAUT
Response RAAUTx
Audio A Dolby Auto-
Align
Parameters x – auto align (0=OFF, 1=ON)
Command not available Audio A Dolby Status
Response not available