Advent DVE5000 SERIES User Manual

Advent Communications
209298 - DVE5000 Technical Operation Handbook - CL140042 Page 88 of 110
Command not available
Response not available
Query RXACT
Response RXACTx
Remux status

Parameters x – status (0=Not Active (indicates error if remux
enabled), 1=Active)
Command WG420xxx
Response RG420xxx
Query RG420
Response RG420xxx
420 DTS offset
Parameters xxx – DTS offset (ms)
Command WG422xxx
Response RG422xxx
Query RG422
Response RG422xxx
422 DTS offset
Parameters xxx – DTS offset (ms)
Command WODELx
Response RODELx
Query RODEL
Response RODELx
Downlink Network
information table (NIT)
Parameters x – status (0=Off, 1 = On)
Command WOSATxxx.xxxx
Response ROSATxxx.xxxx
Query ROSAT
Response ROSATxxx.xxxx
Downlink frequency
Parameters xxx.xxxx = frequency (GHz)
Command WOORBxxx.xxxx
Response ROORBxxx.xxxx
Query ROORB
Response ROORBxxx.xxxx
Downlink Satellite
position
Parameters xxx.xxxx – degrees
Command WODIRx
Response RODIRx
Query RODIR
Response RODIRx
Downlink satellite
direction
Parameters x – direction (0 = WEST, 1=EAST)
Command WOANTx
Response ROANTx
Downlink satellite
polarisation
Query ROANT

Advent DVE5000 SERIES Specifications

General

Brand	Advent
Model	DVE5000 SERIES
Category	Media Converter
Language	English