Micro-Ohmmeter Model 6250
21
4.2.3 Setting the Buzzer Level (bUZZ)
• Turn the rotary switch to the SET-UP position.
• Press the ▲ button until “bUZZ” appears on the top line of the
display.
• Press the ► button to scroll through the choices of OFF (no icon
displayed), LOW (small buzzer icon displayed) or HIGH (large
buzzer icon
displayed). Each choice will display the corre-
sponding icon in the top left corner of the display along with the
associated audible sound.
• When the desired sound level is displayed, press the ► button to
accept it and return to the top level of buzzer set-up.
•
To proceed to the next programming variable, press the ▲ button.
4.2.4 Reading the Internal Serial Number (EdSn)
• Turn the rotary switch to the SET-UP position.
• Press the ▲ button until “EdSn” appears on the top line of the
display.
• Press the ► button to scroll through the serial number. There are
10 digits in the serial number. The rst press will display the rst
ve digits. The second press will display the second ve digits.
EXAMPLE: First press displays: t0302
Second press displays: 044-0
Third press displays: 0001 A
• Press the ► button again to return to the top level of the Serial
Number set-up menu.
•
To proceed to the next programming variable, press the ▲ button.
4.2.5 Reading the Internal Software Version (EdPP)
• Turn the rotary switch to the SET-UP position.
• Press the ▲ button until “EdPP” appears on the top line of the
display.
• Press the ► button to display the rmware version.
• Press the ► button again to return to the top level of the Software
Version set-up menu.
•
To proceed to the next programming variable, press the ▲ button.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
