Micro-Ohmmeter Model 6250
45
CHAPTER 6
DATAVIEW
®
SOFTWARE
6.1 Installing DataView
®
DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING
THE SOFTWARE AND DRIVERS.
NOTE: When installing, the user must have Administrative access
rights during the installation. The users access rights can be changed
after the installation is complete.
DataView
®
must be reinstalled for each user in a multi-user system.
USB Flash Drive Install
1. Insert the USB stick into an available USB port (wait for driver to be
installed).
2. If Autorun is enabled then an AutoPlay window should appear as
shown.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
